10/100/1000Mbps Archives - Bunker Seguridad Electrónica S.L.

eCopper™ – EECF16-GN3-R-Rz-B

Rafael Mora — Mon, 28 Dec 2020 10:32:33 +0000

The KBC eCopper™ EECF16-GN3-R-Rz-B line of products offer a cost-effective way to connect the latest IP cameras using existing coax or copper (UTP) wiring to a remote monitoring station. In addition to saving costs and time from cabling infrastructure upgrades to CAT5/5e/6, eCopper™powers both its transmitter and remote cameras, eliminating the need for any additional power source at the camera site. eCopper™also extends the IP camera cable run distance from 100 to 300 meters, making it ideal for upgrading analog to IP cameras and other systems in large corporate buildings, retail, casinos, banks, prisons, stadiums and other applications.

The EECF16-GN3-R is an Ethernet over Coax (EoC) receiver with 16 coax ports with Power Over Coax (PoC) and 3*10/100/1000M Ethernet ports. This receiver provides connectivity up to 16 units PoC/PoE version EECF1-LS1-T-MN-B transmitter. Power is supplied to the transmitter through the coaxial cable. Varying data rates are supported depending on cable distance and quality. This product also provides PoC management which allows the operator to remotely switch power on or off to any of the coax channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed.LED indicators are provided to show the operational status of the unit clearly. This receiver is available in 1U rack configuration.

Features:

16 coax ports with PoC
3 *10/100/1000M Ethernet ports (1 at the front and 2 at the back)
PoC management
Connect up to 8 units EECF1-LS1-T-IN-B or EECF1-LS1-T-MN-B or any combination
Coax data rate >50Mbps (300m)
PoE+ is supported up to 300m based on coax quality and applied voltage to coax (48~57VDC)
Over current and short circuit protection
Unique PoC transmission protection design so that no power is output when transmitter end is not connected.

The post eCopper™ – EECF16-GN3-R-Rz-B appeared first on Bunker Seguridad Electrónica S.L..

eCopper™ – EECF8-GN3-R-Rz-B

Rafael Mora — Mon, 28 Dec 2020 10:08:14 +0000

The KBC eCopper™ EECF8-GN3-R-Rz-B The KBC eCopper™line of products offer a cost-effective way to connect the latest IP cameras using existing coax or copper (UTP) wiring to a remote monitoring station. In addition to saving costs and time from cabling infrastructure upgrades to CAT5/5e/6, eCopper™powers both its transmitter and remote cameras, eliminating the need for any additional power source at the camera site. eCopper™also extends the IP camera cable run distance from 100 to 300 meters, making it ideal for upgrading analog to IP cameras and other systems in large corporate buildings, retail, casinos, banks, prisons, stadiums and other applications. The KBC EECF8-GN3-R is an Ethernet over Coax (EOC) receiver with 8 coax ports with Power Over Coax (PoC) and 3*10/100/1000M Ethernet ports. This receiver provides connectivity up to 8 units PoC/PoE version EECF1-LS1-T-MN-B transmitter. Power is supplied to the transmitter through the coaxial cable. Varying data rates are supported depending on cable distance and quality. This product also provides PoC management which allows the operator to remotely switch power on or off to any of the coax channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed.LED indicators are provided to show the operational status of the unit clearly. This receiver is available in 1U rack configuration.

Features:

8 coax ports with PoC
3 *10/100/1000M Ethernet ports (1 at the front and 2 at the back)
PoC management
Connect up to 8 units EECF1-LS1-T-IN-B or EECF1-LS1-T-MN-B or any combination
Coax data rate >50Mbps (300m)
PoE+ is supported up to 300m based on coax quality and applied voltage to coax (48~57VDC)
Over current and short circuit protection
Unique PoC transmission protection design so that no power is output when transmitter end is not connected.

The post eCopper™ – EECF8-GN3-R-Rz-B appeared first on Bunker Seguridad Electrónica S.L..

eCopper™ – EECF4-DN1-R-WN-B

Rafael Mora — Mon, 28 Dec 2020 09:44:53 +0000

The KBC eCopper™ EECF4-DN1-R-WN-B line of products offer a cost-effective way to connect the latest IP cameras using existing coax or copper (UTP) wiring to a remote monitoring station. In addition to saving costs and time from cabling infrastructure upgrades to CAT5/5e/6, eCopper™powers both its transmitter and remote cameras, eliminating the need for any additional power source at the camera site. eCopper™also extends the IP camera cable run distance from 100 to 300 meters, making it ideal for upgrading analog to IP cameras and other systems in large corporate buildings, retail, casinos, banks, prisons, stadiums and other applications.

The KBC EECF4-DN1-R is an Ethernet over Coax (EoC) receiver with 4 coax ports with Power Over Coax (PoC) and 1*10/100/1000M Ethernet ports,1*1000Base-FX SFP port. This receiver provides connectivity up to 4 units PoC/PoE version EECF1-LS1-T-MN-B transmitter. Power is supplied to the transmitter through the coaxial cable. Varying data rates are supported depending on cable distance and quality. This product also provides PoC management which allows the operator to remotely switch power on or off to any of the coax channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed.LED indicators are provided to show the operational status of the unit clearly. This receiver is available in DIN rail mount and wall mount.

Features:

4 coax ports with PoC
1 *10/100/1000M Ethernet ports,1*1000Base-FX SFP port
PoC management
Connect up to 4 units EECF1-LS1-T-IN-B or EECF1-LS1-T-MN-B or any combination
Coax data rate >50Mbps (300m)
PoE+ is supported up to 300m based on coax quality and applied voltage to coax (48~57VDC)
Over current and short circuit protection
Unique PoC transmission protection design so that no power is output when transmitter end is not connected

The post eCopper™ – EECF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN2-P1N-xNz-B

Rafael Mora — Mon, 21 Dec 2020 10:19:19 +0000

The KBC MCGN2-P1N series is an industrial two channels 10/100/1000M Ethernet media converter. It supports transmission of two channels 10/100/1000 Base-T Ethernet over SFP port, by selecting different KBC SFP modules, the media converter can be transmitted via one or two, multimode or single mode optical fibers with full duplex operation. There is no A end or B end for MCGN2-P1N series, both ends are same for media converter with SFP port, but when inserting 1 fiber version SFP module, two ends should be matched, that means one end is 1310nm/1550nm SFP, the other end is 1550nm/1310nm SFP .Typically the two channels media converter is installed in remote end, in the head end compatible MCGN1 series is installed. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment.

Features:

10/100/1000M auto sensing port
1*10/100/1000Base-TX Port
1*1000Base-FX SFP Port
2kV Surge Protection on RJ45 electrical Port
Compatible with 1 channel 1000M media converter MCGN1 series
IP40 enclosure
Wall & DIN Mount
FR2-12 passive Rack with 12 slots or Chassis card in FR2-16 with 16 slots

The post Media Converters MCGN2-P1N-xNz-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN1-P1N-xNz-B

Rafael Mora — Mon, 21 Dec 2020 09:58:50 +0000

The KBC MCGN1 series is an industrial 10/100/1000M Ethernet media converter. It supports transmission of one channel 10/100/1000 Base-T Ethernet over SFP port, by selecting different KBC SFP modules, the media converter can be transmitted via one or two, multimode or single mode optical fibers with full duplex operation. There is no A end or B end for MCLN1-P1N series, both ends of MCGN1-P1N are same , but when inserting 1 fiber version SFP module, two ends should be matched, that means one end is 1310nm/1550nm SFP, the other end is 1550nm/1310nm SFP. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment.

Features:

10/100/1000M auto sensing port
1*10/100/1000Base-TX Port
1*1000Base-FX SFP Port
2kV Surge Protection on RJ45 electrical Port
Compatible with one channel MCGN1 series with 1*9 optics, two cannel 10/100/1000M media converter MCGN2 series
IP40 enclosure
DIN, Wall Mount
FR2-12 passive Rack with 12 slots or Chassis card in FR2-16 with 16 slots

The post Media Converters MCGN1-P1N-xNz-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN2-S1A/S1B-xyz-B

Rafael Mora — Mon, 21 Dec 2020 09:46:09 +0000

The KBC MCGN2 series is an industrial two channels 10/100/1000M Ethernet media converter. It supports transmission of two channel 10/100/1000 Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. Typically the two channels media converter is installed in remote end, in the head end compatible one channel media converter MCGN1 is installed. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment.

Features:

2 channels 10/100/1000M auto sensing
2kV Surge Protection on RJ45 electrical Port
Compatible with 1 channel 10/100/1000M media converter MCGN1 series SM (Single Mode), and MM (Multi Mode)
1 fiber or 2 fibers
SM&MM: 1310nm/1550m, for 1 fiber; 1310nm for 2 fibers
Typical SM and MM transmission distance are 20km and 500m respectively.Longer distance is available
IP40 enclosure
DIN, Wall Mount
FR2-12 passive Rack with 12 slots

The post Media Converters MCGN2-S1A/S1B-xyz-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN2-S2N-xyz-B

Rafael Mora — Mon, 21 Dec 2020 09:41:12 +0000

Features:

2 channels 10/100/1000M auto sensing
2kV Surge Protection on RJ45 electrical Port
Compatible with 1 channel 10/100/1000M media converter MCGN1 series SM (Single Mode), and MM (Multi Mode)
1 fiber or 2 fibers
SM&MM: 1310nm/1550m, for 1 fiber; 1310nm for 2 fibers
Typical SM and MM transmission distance are 20km and 500m respectively.Longer distance is available
IP40 enclosure
DIN, Wall Mount
FR2-12 passive Rack with 12 slots

The post Media Converters MCGN2-S2N-xyz-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN1-S1A/S1B-xyz-B

Rafael Mora — Mon, 21 Dec 2020 09:31:18 +0000

The KBC MCGN1-S1A/S1B-xyz-B series is an industrial 10/100/1000M Ethernet media converter. It supports transmission of one channel 10/100/1000Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment. The series is available in wall mount, DIN mount, and 2U passive rack FR2-12, or card version in 2U chassis FR2-16.

Features:

10/100/1000M auto sensing
2kV Surge Protection on RJ45 electrical Port
Compatible with SFP version of one channel MCGN1 series and two channels MCGN2 series
SM(Single Mode) , and MM(Multi Mode)
1 fiber or 2 fibers
SM&MM: 1310nm/1550m for 1 fiber; 1310nm for 2 fibers
Typical SM and MM transmission distance are 20KM and 500m respectively .Longer distance is available
IP40 enclosure
DIN, Wall Mount
FR2-12 passive Rack with 12 slots or Chassis card in FR2-16 with 16 slots

The post Media Converters MCGN1-S1A/S1B-xyz-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN1-S2N-xyz-B

Rafael Mora — Mon, 21 Dec 2020 09:25:09 +0000

The KBC MCGN1 series is an industrial 10/100/1000M Ethernet media converter. It supports transmission of one channel 10/100/1000Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment. The series is available in wall mount, DIN mount, and 2U passive rack FR2-12, or card version in 2U chassis FR2-16.

Features:

10/100/1000M auto sensing
2kV Surge Protection on RJ45 electrical Port
Compatible with SFP version of one channel MCGN1 series and two channels MCGN2 series
SM(Single Mode) , and MM(Multi Mode)
1 fiber or 2 fibers
SM&MM: 1310nm/1550m for 1 fiber; 1310nm for 2 fibers
Typical SM and MM transmission distance are 20KM and 500m respectively .Longer distance is available
IP40 enclosure
DIN, Wall Mount
FR2-12 passive Rack with 12 slots or Chassis card in FR2-16 with 16 slots

The post Media Converters MCGN1-S2N-xyz-B appeared first on Bunker Seguridad Electrónica S.L..

Media Converters MCGN2-M1A/M1B-xyz-B

Rafael Mora — Mon, 21 Dec 2020 09:14:47 +0000

The KBC MCGN2-(M1A)-(M1B)-xyz-B series is an industrial two channels 10/100/1000M Ethernet media converter. It supports transmission of two channel 10/100/1000 Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. Typically the two channels media converter is installed in remote end, in the head end compatible one channel media converter MCGN1 is installed. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment.

Features:

2 channels 10/100/1000M auto sensing
2kV Surge Protection on RJ45 electrical Port
Compatible with 1 channel 10/100/1000M media converter MCGN1 series SM (Single Mode), and MM (Multi Mode)
1 fiber or 2 fibers
SM&MM: 1310nm/1550m, for 1 fiber; 1310nm for 2 fibers
Typical SM and MM transmission distance are 20km and 500m respectively.Longer distance is available
IP40 enclosure
DIN, Wall Mount
FR2-12 passive Rack with 12 slots

The post Media Converters MCGN2-M1A/M1B-xyz-B appeared first on Bunker Seguridad Electrónica S.L..