Wall-mounting. For ground mounting please see prewired perimeter tower model S30xxx.

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams – (*) chosen by the customer – and their mounting back plates.

(*)  Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others) (not included in price). easyPack can also be supplied without photoelectric beams.

Ready for wall-mounting.

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height:

• W302RR – 3m, 180° wall-mounting tower ready for 2 Rx.
• W302TT – 3m, 180° wall-mounting tower ready for 2 Tx.
• W303RR – 3m, 180° wall-mounting tower ready for 3 Rx.
• W303TT – 3m, 180° wall-mounting tower ready for 3 Tx.
• W304RR – 3m, 180° wall-mounting tower ready for 4 Rx.
• W304TT – 3m, 180° wall-mounting tower ready for 4 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 3m, wall installation appeared first on Bunker Seguridad Electrónica S.L..

Wall-mounting. For ground mounting please see prewired perimeter tower model S20xxx.

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams – (*) chosen by the customer – and their mounting back plates.

(*)  Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photoelectric beams.

This perimeter tower is ready for wall-mounting.

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, etc.). For more information see “Accessories” paragraph.

Most common models for 2m height and 180º:

• W202RR – 2m, 180° wall-mounting tower ready for 2 Rx.
• W202TT – 2m, 180° wall-mounting tower ready for 2 Tx.
• W203RR – 2m, 180° wall-mounting tower ready for 3 Rx.
• W203TT – 2m, 180° wall-mounting tower ready for 3 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 2m, wall installation appeared first on Bunker Seguridad Electrónica S.L..

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams (*), chosen by the customer and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in the price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, floor bracket to be used with concrete, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height and 180º:

• S302RR – 3m, 180° tower ready for 2 Rx.
• S302TT – 3m, 180° tower ready for 2 Tx.
• S303RR – 3m, 180° tower ready for 3 Rx.
• S303TT – 3m, 180° tower ready for 3 Tx.
• S304RR – 3m, 180° tower ready for 4 Rx.
• S304TT – 3m, 180° tower ready for 4 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 3m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

Ground mounting. For wall-mounting please see prewired perimeter tower model W20xxx.

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams (*), chosen by the customer and their mounting back plates.

(*) Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photoelectric beams.

It also includes side brackets.

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, 0,70m steel side brackets, floor bracket to be used in combination with concrete, etc.). For more information see “Accessories” section.

Most common models for 2m height and 180º:

• S202RR – 2m, 180° tower ready for 2 Rx.
• S202TT – 2m, 180° tower ready for 2 Tx.
• S203RR – 2m, 180° tower ready for 3 Rx.
• S203TT – 2m, 180° tower ready for 3 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 2m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

Ground mounting. For wall-mounting the accessory PTWB is required.

Features:

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), thermostat and the motherboard that manages all the system.

Everything is prewired and mounted together with the IR beams (*) – chosen by the customer – and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as the other usual Bunker’s beam towers’ accessories (anti-climb top tamper, concrete floor bracket, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height:

• D304RR – 3m, 360° tower ready for 4 Rx on each side.
• D304TT – 3m, 360° tower ready for 4 Tx on each side.
• D304TR – 3m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
• D306RR – 3m, 360° tower ready for 6 Rx on each side.
• D306TT – 3m, 360° tower ready for 6Tx on each side.
• D306TR – 3m, 360° tower ready for 2 Tx on one side and 3 Rx on the other side.
• D308RR – 3m, 360° tower ready for 8 Rx on each side.
• D308TT – 3m, 360° tower ready for 8 Tx on each side.
• D308TR – 3m, 360° tower ready for 4 Tx on one side and 4 Rx on the other side.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 360°, 3m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

Ground mounting. For wall-mounting the accessory PTWB is required.

Features:

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), thermostat and the motherboard that manages all the system.

Everything is prewired and mounted together with the IR beams (*) – chosen by the customer – and their mounting back plates.

(*) Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others). These are not included in the price. easyPack can also be supplied without photoelectric beams.

Additionally, as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, 0,70m steel side brackets, concrete floor bracket, etc.). For more information see “Accessories” section.

Most common models for 2m height:

• D204RR – 2m, 360° tower ready for 2 Rx on each side.
• D204TT – 2m, 360° tower ready for 2 Tx on each side.
• D204TR – 2m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
• D206RR – 2m, 360° tower ready for 3 Rx on each side.
• D206TT – 2m, 360° tower ready for 3 Tx on each side.
• D206TR – 2m, 360° tower ready for 3 Tx on one side and 3 Rx on the other side.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 360°, 2m, ground installation appeared first on Bunker Seguridad Electrónica S.L..