IP over UTP or coax: eCopper™ - Bunker Seguridad Electrónica S.L. https://bunkerseguridad.com/en/security/data-transmission/ecopper-ip-over-utp-coax/ Manufacturing and distribution of perimeter detection systems in Europe. Tue, 29 Dec 2020 10:33:39 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.1 https://bunkerseguridad.com/en/wp-content/uploads/2021/02/cropped-Bunker-seguridad--32x32.png IP over UTP or coax: eCopper™ - Bunker Seguridad Electrónica S.L. https://bunkerseguridad.com/en/security/data-transmission/ecopper-ip-over-utp-coax/ 32 32 eCopper™ – Chassis – FR1-08-NN-B https://bunkerseguridad.com/en/security-product/ecopper-chasis-fr1-08-nn-b/ Tue, 29 Dec 2020 10:11:57 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6361 eCopper™ Chassis for stand-alone modules FR1-08-NN-B 1RU 19" chassis card cage for up to (8) stand-alone single channel EoC/EoU transmitter/receiver, without power supply.

The post eCopper™ – Chassis – FR1-08-NN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC FR1-08-NN-B series chassis is a high quality 1U, 19” rack mounted open-top cage. It can accommodate up to 8 single channel eCopper™ products.

 

The post eCopper™ – Chassis – FR1-08-NN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERN1-LN1-R-Mz-B https://bunkerseguridad.com/en/security-product/ecopper-eern1-ln1-r-mz-b/ Tue, 29 Dec 2020 09:26:55 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6358 eCopper™ - IP over UTP The KBC EERN1-LN1-T-Mz-B 1-ch non-PoE industrial Ethernet over UTP receiver. (1) fixed Ethernet port, 10/100Mbps autosensing. (1) UTP port. Input 12~24VDC. Compact module with clip mount.

The post eCopper™ – EERN1-LN1-R-Mz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ –  The KBC EERN1-LN1-R-Mz-B is a fully ruggedized Ethernet over UTP transmitter and the KBC EERN1-LN1-R-MX-B is a fully ruggedized Ethernet over UTP receiver. The transmitter provides connectivity for one 10/100Mbps IEEE standard electrical copper port over UTP cable. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to clearly show the operational status of the unit. The size of the transmitter is suited for fitting inside camera housings and where space is minimal.

Features:

  • UTP data rate >40Mbps (1000m)
  • Complete protection design including surge protection, lighting protection

The post eCopper™ – EERN1-LN1-R-Mz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERN1-LN1-T-Mz-B https://bunkerseguridad.com/en/security-product/ecopper-eern1-ln1-t-mz-b/ Tue, 29 Dec 2020 09:16:41 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6354 eCopper™ - IP over UTP The KBC EERN1-LN1-T-Mz-B 1-ch non-PoE industrial Ethernet over UTP transmitter. (1) fixed Ethernet port, 10/100Mbps autosensing. (1) RJ-45 UTP port. Input 12~24VDC. Compact module with clip mount.

The post eCopper™ – EERN1-LN1-T-Mz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ –  The KBC EERN1-LN1-T-MX-B is a fully ruggedized Ethernet over UTP transmitter and the KBC EERN1-LN1-R-MX-B is a fully ruggedized Ethernet over UTP receiver. The transmitter provides connectivity for one 10/100Mbps IEEE standard electrical copper port over UTP cable. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to clearly show the operational status of the unit. The size of the transmitter is suited for fitting inside camera housings and where space is minimal.

Over the past few years, the video surveillance industry has moved heavily into IP networks, more and more HD and Megapixel IP cameras are being installed. Most new systems are now HD or Megapixel IP cameras connected by CAT5/5e/6 cables or making use of existing fibers. Some older analog systems used UTP for better anti-interference with distances between 100m to 300m. The biggest challenge of upgrading these older analog systems with UTP to IP is the cabling. In most cases, it is cost prohibitive and often impractical to re-lay the new cables. Furthermore, IEEE Ethernet standards limit the distance to 100m. In this case, using the existing UTP to transmit HD and Megapixel IP cameras is the most economical choice. KBC designed the eCopper™ products to meet such constraints

Features:

  • UTP data rate >40Mbps (1000m)
  • Complete protection design including surge protection, lighting protection

The post eCopper™ – EERN1-LN1-T-Mz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERF16-GN3-R-Rz-B https://bunkerseguridad.com/en/security-product/ecopper-eecf16-gn3-r-rz-b-2/ Tue, 29 Dec 2020 08:12:01 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6346 eCopper™ - The KBC EERF16-GN3-R-Rz-B 16-port industrial Ethernet over UTP receiver. 16 UTP ports with EoU/PoW up to 400m. (3) 10/100/1000Mbps Ethernet ports. Input 48~57VDC. 1RU rack mount. 100~240VAC, 50/60Hz.

The post eCopper™ – EERF16-GN3-R-Rz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ EECF16-GN3-R-Rz-B series is an Ethernet over UTP (EoU) receiver with 16 UTP ports supplying Power over Wire (PoW) and 3*10/100/1000M Ethernet ports. This receiver provides connectivity up to 16 PoW/PoE (EERF1-LS1-T-MN-B)transmitters. Power is supplied to the transmitter through the UTP cable. Varying data rates are supported depending on cable distance and quality. This product also provides PoW management which allows the operator to remotely switch power on or off to any of the UTP channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed.LED indicators are provided to show the operational status of the unit.

Features:

  • 16 UTP ports with PoW
  • 3 *10/100/1000M Ethernet ports (1 on the front and 2 at the rear)
  • PoW management
  • Connect up to 16 transmitters EERF1-LS1-T-MN-B.
  • UTP data rate >40Mbps (300m))
  • Based on cable quality, cable pairs used (1, 2 or 4 pairs) and voltage applied to cable (48~57VDC) from headend. PoE and PoE+ are supported by PoW up to 400m.
  • Over current and short circuit protection
  • Unique PoC transmission protection design so that no power is output when transmitter end is not connected

The post eCopper™ – EERF16-GN3-R-Rz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERF8-GN3-R-Rz-B https://bunkerseguridad.com/en/security-product/eerf8-gn3-r-rz-b/ Mon, 28 Dec 2020 12:53:38 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6342 eCopper™ - The KBC EERF8-GN3-R-Rz-B 8-port industrial Ethernet over Coax receiver. 8 BNC ports with EoC/PoC up to 700m, EoC/PoE+ up to 300m. (3) 10/100/1000Mbps Ethernet ports. Input 48~57VDC. 1RU rack mount. 100~240VAC, 50/60Hz.

The post eCopper™ – EERF8-GN3-R-Rz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ EERF8-GN3-R-Rz-B series is an Ethernet over UTP (EoU) switch with 8 UTP ports supplying Power over Wire (PoW) and 3*10/100/1000M Ethernet ports. This switch provides connectivity up to 8 PoW/PoE (EERF1-LS1-T-MN-B) transmitters. Power is supplied to the transmitter through the UTP cable. Varying data rates are supported depending on cable distance and quality. This product also provides PoW management which allows the operator to remotely switch power on or off to any of the UTP channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit.

Features:

  • 8 UTP ports with or without PoW
  • 3 *10/100/1000M Ethernet ports (1 on the front and 2 at the rear)
  • PoW management
  • Full switching capability
  • Connect up to 16 transmitters, EERF1-LS1-T-MN-B or EERN1-LN1-T-MN-B or mixed.
  • UTP data rate >40Mbps (300m)
  • Based on cable quality ,cable pairs used (1,2,or 4 pairs) and voltage applied to cable (48~57VDC) from headend , PoE and PoE+ are supported by PoW up to 400m
  • Over current and short circuit protection
  • Unique PoW transmission protection design so that no power is output when transmitter end is not connected

The post eCopper™ – EERF8-GN3-R-Rz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERF4-DN1-R-WN-B https://bunkerseguridad.com/en/security-product/ecopper-eerf4-dn1-r-wn-b/ Mon, 28 Dec 2020 12:32:58 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6339 eCopper™ - The KBC EERF4-DN1-R-WN-B series is an Ethernet over UTP (EoU) receiver with 4 UTP ports supplying Power over Wire (PoW), 1*10/100/1000M Ethernet port and 1*1000Base-FX port. This switch provides connectivity up to 4* PoW/PoE (EERF1-LS1-T-MN-B) transmitters.

The post eCopper™ – EERF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ EERF4-DN1-R-WN-B is a fully ruggedized Ethernet over coax transmitter. This transmitter provides connectivity for four 10/100Mbps IEEE standard twisted pair copper ports over a 75ohm coaxial cable. Power is supplied from the headend receiver EECF1-LN1–R through the coaxial cable by Power over Coax (PoC) technology. This transmitter provides PoE/PoE+ support. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with n4 UTP ports with or without PoW.

Features:

  • 4 UTP ports with or without PoW
  • 1 *10/100/1000M Ethernet port,1 *1000Base-FX SFP port
  • PoW management
  • Full switching capability
  • Connect up to 4 transmitters, EERF1-LS1-T-MN-B or EERN1-LN1-T-MN-B or mixed.
  • UTP data rate >40Mbps (300m)
  • Based on cable quality, cable pairs used (1,2 or 4 pairs) and voltage applied to cable (48~57VDC) from headend , PoE and PoE+ are supported by PoW up to 400m.
  • Over current and short circuit protection
  • Unique PoW transmission protection design so that no power is output when transmitter end is not connected

The post eCopper™ – EERF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERF1-LN1-R-MN-B https://bunkerseguridad.com/en/security-product/ecopper-eerf1-ln1-r-mn-b/ Mon, 28 Dec 2020 12:15:10 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6337 eCopper™ - IP over UTP The KBC EERF1-LN1-R-MN-B 1-ch industrial Ethernet over UTP receiver. EoU/PoW/PoE+, (1) fixed Ethernet port, 10/100Base-T auto-sensing. (1) fixed UTP port, providing EoU/PoW. Input 48~57VDC. Requires power supply sold separately.

The post eCopper™ – EERF1-LN1-R-MN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ EERF1-LN1-R-MX-B series is an Ethernet over UTP (EoU) switch with 1 UTP port supplying Power over Wire (PoW) and 1*10/100M Ethernet port. This switch provides connectivity to one PoW/PoE (EERF1-LS1-T-MN-B) transmitter. Power is supplied to the transmitter through the UTP cable. Varying data rates are supported depending on cable distance and quality. Plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit clearly.

Features:

  • 1 UTP port with or without PoW
  • 1 *10/100M Ethernet port
  • Connect one transmitter, EERF1-LS1-T-MN-B or EERN1-LN1-T-MN-B.
  • UTP data rate >40Mbps (300m)
  • Based on cable quality, cable pairs used (1,2 or4 pairs) and voltage applied to cable (48~57VDC) from headend, PoE and PoE+ are supported by PoW up to 400m.
  • Over current and short circuit protection
  • Unique PoW transmission protection design so that no power is output when the transmitter end is not connected.

The post eCopper™ – EERF1-LN1-R-MN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERF1-LS1-T-IN-B https://bunkerseguridad.com/en/security-product/ecopper-eerf1-ls1-t-in-b-3/ Mon, 28 Dec 2020 12:02:02 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6334 eCopper™ - IP over UTP The KBC EERF1-LS1-T-IN-B 1-ch industrial Ethernet over UTP transmitter. EoU/PoW/PoE+, (1) Ethernet port, 10/100Mbps auto-sensing, 30W end-span 802.3at PoE+. (1) flying lead UTP port, EoU/PoW, powered from EERF series receiver. Compact module with Velcro fastener.

The post eCopper™ – EERF1-LS1-T-IN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™The KBC EERF1-LS1-T-IN-Bis a fully ruggedized Ethernet over UTP transmitter. This transmitter provides connectivity for one 10/100Mbps IEEE standard electrical copper port over UTP cable. Power is suppliedfrom one of the headend Receivers, EERF16-G3-R-RX-B, EERF8-G3-R-RX-B, EERF4-DN1-R-WN-B or EERF1-LS1-R-MN-B Ethernet over UTP units through the UTP cable by Power over Wire (PoW) technology. The transmitter provides direct PoE+ support. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit.The Ethernet port of the transmitterincludes a flying cable.

Features:

  • 802.3af/802.3at compliant
  • PoE+ (30W) and Power over Wire
  • The Ethernet port includes a flying cable
  • UTP data rate >40Mbps (300m)
  • Based on cable quality ,cable pairs used (1,2 or 4 pairs) and voltage applied to cable (48~57VDC) from headend, PoE and PoE+ are supported by PoW up to 400m.
  • Powered by PoW from EERF16-G3-R-RX-B, EERF8-G3-R-RX-B, EERF4-DN1-R-WN-B or EERF1-LS1-R-MN-B headend
  • Complete protection design including surge protection, lighting protection
  • UniquePoWtransmissionprotection design together with 1,4,8 or 16 channelsreceiver at headend

The post eCopper™ – EERF1-LS1-T-IN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EERF1-LS1-T-MN-B https://bunkerseguridad.com/en/security-product/ecopper-eerf1-ls1-t-in-b-2/ Mon, 28 Dec 2020 11:31:10 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6329 eCopper™ - IP over UTP The KBC EERF1-LS1-T-MN-B is a fully ruggedized Ethernet over coax one channel transmitter, 1-ch industrial Ethernet over UTP transmitter. EoU/PoW/PoE+, (1) Ethernet port, 10/100Mbps auto-sensing, 30W end-span 802.3at PoE+. (1) flying lead UTP port, EoU/PoW, powered from EERF series receiver. Compact module with Velcro fastener.

The post eCopper™ – EERF1-LS1-T-MN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ is a fully ruggedized Ethernet over UTP transmitter. This transmitter provides connectivity for one 10/100Mbps IEEE standard electrical copper port over UTP cable. Power is supplied from one of the headend Receivers, EERF16-G3-R-RX-B, EERF8-G3-R-RX-B, EERF4-DN1-R-WN-B or EERF1-LS1-R-MN-B Ethernet over UTP units through the UTP cable by Power over Wire (PoW) technology. The transmitter provides PoE+ support. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit.

Features:

  • 802.3af/802.3at compliant
  • Power over Wire
  • UTP data rate >40Mbps (300m)
  • Based on cable quality ,cable pairs used (1,2 or 4 pairs) and voltage applied to cable (48~57VDC) from headend, PoE and PoE+ are supported by PoW up to 400m.
  • Powered by PoW from EERF16-G3-R-RX-B , EERF8-G3-R-RX-B, EERF4-DN1-R-WN-B or EERF1-LS1-R-MN-B headend
  • Complete protection design including surge protection, lighting protection
  • Unique PoW transmission protection design together with 1,4,8 or 16 channels receiver headend

The post eCopper™ – EERF1-LS1-T-MN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EECN1-LN1-R-Mz-B https://bunkerseguridad.com/en/security-product/ecopper-eecn1-ln1-r-mz-b/ Mon, 28 Dec 2020 11:09:18 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6327 The KBC Copper™ - EECN1-LN1-R-MZ-B 1-ch non-PoE industrial Ethernet over coax non-PoE transmitter, (1) fixed BNC and (1) fixed RJ-45 Ethernet port, 10/100Mbps auto-sensing. Input 12~24VDC. Compact module with clip mount.EECN1-LN1-R-Mz-B1-ch non-PoE industrial Ethernet over coax non-PoE receiver, (1) fixed BNC and (1) fix.

The post eCopper™ – EECN1-LN1-R-Mz-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC EECN1-LN1-R-Mz-B Its BNC port connects to coax and its 10/100M Base-T port connects to a switch. It provides connectivity to a 10/100Mbps IEEE standard twisted pair copper port over a 75ohm coaxial cable.  Varying data rates are supported depending on cable distance and quality.  The plug-and-play design ensures ease of installation with no electrical adjustment needed.  LED indicators are provided to show the operational status of the unit.

Most new systems are now HD or Megapixel IP cameras connected by CAT5/5e/6 cables or making use of existing fibers. The biggest challenge of upgrading older analog systems with coax cables to IP is the cabling. In most cases, it is cost prohibitive and often impractical to re-lay new cables. Using the existing coax to transmit HD and Megapixel IP cameras is the most economical choice. KBC have designed eCopper™ products to meet such constraints. The KBC EECN1-LN1-T-MX-B is a fully ruggedized Ethernet over coax transmitter and the EECN1-LN1-R-MX-B is a fully ruggedized Ethernet over coax receiver. This transmitter provides connectivity for one 10/100Mbps IEEE standard twisted pair copper port over a 75ohm coaxial cable. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit. The size of the transmitter is suited for fitting inside camera housing and where space is minimal.

Features:

  • Coax data rate >50Mbps (700m) based on coax quality
  • Complete protection design including surge protection, lightning protection

The post eCopper™ – EECN1-LN1-R-Mz-B appeared first on Bunker Seguridad Electrónica S.L..

]]>