Takex Archives - Bunker Seguridad Electrónica S.L. https://bunkerseguridad.com/en/brand/takex/ Manufacturing and distribution of perimeter detection systems in Europe. Wed, 16 Mar 2022 11:40:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.1 https://bunkerseguridad.com/en/wp-content/uploads/2021/02/cropped-Bunker-seguridad--32x32.png Takex Archives - Bunker Seguridad Electrónica S.L. https://bunkerseguridad.com/en/brand/takex/ 32 32 Battery operated wireless ready quad beam TXF-125DM https://bunkerseguridad.com/en/security-product/battery-powered-wireless-quad-beam-txf-125dm/ Wed, 16 Mar 2022 10:34:23 +0000 https://bunkerseguridad.com/en/?post_type=product&p=255034 The TXF-125DM is a battery operated quad beam sensor, compatible with leading wireless systems. It reduces the time and cost of permanent installations and allows the use of active infrared beams on rapid deployment in creating temporary or permanent installations.

The post Battery operated wireless ready quad beam TXF-125DM appeared first on Bunker Seguridad Electrónica S.L..

]]> The double modulation technology guarantees detection stability and reduces the possibility of unwanted activations due to changes in ambient light. Thanks to its IP65 design, its high performance is unaffected by installation conditions, preventing water, dust and insects from entering and allowing moisture to evaporate inside, avoiding condensation.

With 4-channel frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones. The adjustable detection distance allows a single beam set to be re-deployed in a variety of different installations throughout its operational life

Featuring ±90° horizontal and ±20° vertical optical head adjustment, the TXF-125DM can cater for even the most dynamic of terrains, ensuring high performance intrusion detection in almost any environment.

Features:

  • Outdoor or indoor detection with IP65 housing.
  • Double modulation.
  • 4 selectable operation ranges 25/50/75/100m.
  • 4 selectable beam channels to prevent crosstalk.
  • Up to 3 year battery life using 6 × LS 33600 (3.6V 17Ah) batteries (TX : 4pcs, RX : 2PCS). Batteries are not included.
  • Easy ±90° Horizontal / ±20°vertical adjustment.
  • Anti-bird spikes to prevent our feathered friends from alighting on the units.
  • Lightning surge protection.

The post Battery operated wireless ready quad beam TXF-125DM appeared first on Bunker Seguridad Electrónica S.L..

]]> Battery powered quad beam TXF-125-KH https://bunkerseguridad.com/en/security-product/battery-powered-beam-txf-125-kh/ Tue, 19 Jan 2021 10:53:22 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6952 The TXF-125-KH is a battery operated quad beam sensor for use in beam towers, compatible with leading wireless systems. It reduces the time and cost of permanent installations and allows the use of active infrared beams on rapid deployment or temporary installations.

The post Battery powered quad beam TXF-125-KH appeared first on Bunker Seguridad Electrónica S.L..

]]> With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones.

Two 3,6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.

Features:

  • 4 x synchronised high power beams
  • 4 selectable operation ranges 25/50/75/100m
  • 4 selectable beam channels to prevent crosstalk
  • up to 5 year battery life using 2 x LS 33600 (3,6V 17Ah) batteries per unit
  • increased beam separation minimises nuisance alarms
  • vivid internal colour aids beam alignment procedure
  • ±90° horizontal ±20° vertical adjustable sensor heads
  • environmental monitoring circuit

The post Battery powered quad beam TXF-125-KH appeared first on Bunker Seguridad Electrónica S.L..

]]> External PIR-T15WE /T15AM https://bunkerseguridad.com/en/security-product/external-pir-t15we-t15am/ Fri, 15 Jan 2021 12:01:14 +0000 https://bunkerseguridad.com/en/?post_type=product&p=6876 The PIR-T15- WE/AM is a high performance triple mirror passive infrared detector designed for both indoor and outdoor intruder applications. Up to 15m x 80 Degree, Mounting Height 2 - 6m, 3 mirrors, IP5.

The post External PIR-T15WE /T15AM appeared first on Bunker Seguridad Electrónica S.L..

]]> The PIR-T15 is a high performance triple mirror passive infrared detector designed for both indoor and outdoor intruder applications.

The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including Low Position, High Position, Pet Mode, and High Density; for distances up to 15m from a mounting height of 2 to 6m, throughout a full 80 degrees.

Features:

  • 4 Operation modes; Low Position, High Position, Pet Mode, and High Density
  • Up to 15m x 80 degree coverage
  • 2m to 6m Installation height (depending on operation mode)
  • High performance triple mirror optical system
  • Precise detection area adjustment function
  • Anti-masking function (PIR-T15AM)
  • Lightning surge protection
  • Suitable for indoor and outdoor use (IP55)

The post External PIR-T15WE /T15AM appeared first on Bunker Seguridad Electrónica S.L..

]]> IP interface module INT-QUADIP https://bunkerseguridad.com/en/security-product/ip-interface-module-int-quadip/ Mon, 19 Oct 2020 08:11:46 +0000 https://bunkerseguridad.com/en/?post_type=product&p=3019 Allow your surveillance solution to reach its full potential by integrating Takex beam sensors directly with your IP system; start recording when somebody enters the area, move a PTZ camera to the location of an intrusion, or activate lighting

The post IP interface module INT-QUADIP appeared first on Bunker Seguridad Electrónica S.L..

]]> Allow your surveillance solution to reach its full potential by integrating Takex beam sensors directly with your IP system; start recording when somebody enters the area, move a PTZ camera to the location of an intrusion, or activate lighting. While network alarms and Power over Ethernet are standard on IP cameras, most surveillance equipment use relay outputs and 12V power. With the Takex IP interface module, our photoelectric beams are as easy as IP cameras to install and integrate with Video Management Systems.

VMS Integration

Takex IP sensors support direct integration with leading VMS and camera systems on the market. Create powerful security solutions where recording starts automatically, the cameras are directed to the location of intrusion, and guards are alerted with detailed alarm information.

One Cable Installation

Integrating a sensor to a modern IP security system using old technologies requires a lot of third-party products and man-hours. With IP and PoE only an ethernet cable from the product to the nearest PoE switch is required. Installation is just as easy as installing an IP camera.

keywords: surveillance solution, Takex, beam sensors, IP system, PTZ camera, activate lighting, network alarms, Power over Ethernet, IP cameras, surveillance equipment, 12V power, IP interface module, photoelectric beams, IP cameras, Video Management Systems, IP sensors, leading VMS, camera systems, security solutions, recording automatically, detailed alarm information, sensor, modern IP, security system, third-party products, man-hours, PoE, ethernet cable, PoE switch, IP camera, PoE Class 3, IEEE 802.3af, VMS compatible, Axis, Bosch, Hikvision, Sony, plug & play web, browser interface, PB-IN-HF/A, PB-F, PB-IN-100AT, PB-KH series,

Features:

  • PoE Class 3
  • IEEE 802.3af
  • VMS compatible
  • Direct control of supported cameras* including: Axis, Bosch, Hikvision, Sony
  • Plug & play web browser interface
  • No software or installation required
  • One cable installation
  • Designed for PB-IN-HF/A, PB-F, PB-IN-100AT, & PB-KH series

The post IP interface module INT-QUADIP appeared first on Bunker Seguridad Electrónica S.L..

]]> Flame Sensor FS-3500E https://bunkerseguridad.com/en/security-product/flame-sensor-fs-3500e/ Fri, 16 Oct 2020 09:16:26 +0000 https://bunkerseguridad.com/en/?post_type=product&p=2908 The FS-3500 Flame Sensor immediately detects UV rays contained in flames to trigger a pre-recorded "flame prohibition" or "non-smoking" message output in a choice of 5 languages; English, Spanish, Japanese, Chinese and Korean.

The post Flame Sensor FS-3500E appeared first on Bunker Seguridad Electrónica S.L..

]]> The FS-3500 Flame Sensor immediately detects UV rays contained in flames to trigger a pre-recorded “flame prohibition” or “non-smoking” message output in a choice of 5 languages; English, Spanish, Japanese, Chinese and Korean. The sensor can be powered from two type-AA alkaline batteries (supplied) or hardwired (10-30VDC), and features a detachable base unit with a snap-in/out design for easy installation.

Features:

  • Up to 10m (33ft) UV detection
  • Pre-recorded flame prohibition and non-smoking messages in 5 languages
  • Long/short message selectable
  • Detachable base unit with snap-in/out sensor design for easy installation
  • Battery (2x type-AA alkaline supplied) or 10-30VDC operation

The post Flame Sensor FS-3500E appeared first on Bunker Seguridad Electrónica S.L..

]]> Flame Sensor FS-5000E https://bunkerseguridad.com/en/security-product/flame-sensor-fs-5000e/ Fri, 16 Oct 2020 08:42:41 +0000 https://bunkerseguridad.com/en/?post_type=product&p=2883 Flame sensor FS-5000E immediately detects ultraviolet rays contained in flames and activates an external output. Weather proof construction of the housing enables application outdoors. It can be widely used for fire prevention of areas where fire is prohibited. Omni-directional Bracket.

The post Flame Sensor FS-5000E appeared first on Bunker Seguridad Electrónica S.L..

]]> Functions:
● Alarm memory function

Memory indication function enables identification of individual sensors in multiple sensor on configuration. After raising an alarm, the memory indication LED blinks for 3 minutes and then lights for 47 minutes.

● Day/night time discernment function

By adjusting operation mode control switch, output operation can be controlled according to ambient light level. Selectable for night time only. (5 lux – ∞ lux)

● Output time set up

Time of detection output operation can be adjusted by a switch [off delay selectable approx. 2 sec. – 1 min. or approx. 5 sec. – 10 min.]

8 SELECTABLE SENSITIVITY LEVELS

＊2 sensitivity settings High & Low
＊4 detection timer settings : 1 sec., 6 sec., 15 sec., 30 sec.
Possibility of false alarms can be reduced. The set up can be selected from the 8 levels according to the environment of installation. Area masking enables elimination of unnecessary detection areas.

WHITE BODY MATCHES EVERY LOCATION
Aesthetically pleasing white housing blends well with most surroundings. The unique ball lock mechanism allows for adjustment of the detection area after installation.

Features:

  • High sensitivity ultraviolet flame sensor
  • Omni-directional bracket
  • NO/NC relay output
  • Adjustable response time
  • Weather proof housing for indoor or outdoor use

The post Flame Sensor FS-5000E appeared first on Bunker Seguridad Electrónica S.L..

]]> Flame Sensor FS-2000E https://bunkerseguridad.com/en/security-product/flame-sensor-fs-2000e/ Fri, 16 Oct 2020 07:44:11 +0000 https://bunkerseguridad.com/en/?post_type=product&p=2840 The FS-2000E Flame sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output, adjustable Sensor Head.

The post Flame Sensor FS-2000E appeared first on Bunker Seguridad Electrónica S.L..

]]> The FS-2000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.

Features:

  • External Output to a Security System
  • Alarm Memory
  • Variable Response Timer
  • Built-in Alarm Sounder
  • Variable Protection Area Adjustment
  • Compact Design

The post Flame Sensor FS-2000E appeared first on Bunker Seguridad Electrónica S.L..

]]> Flame Sensor FS-1000E https://bunkerseguridad.com/en/security-product/flame-sensor-fs-1000e/ Fri, 16 Oct 2020 07:25:13 +0000 https://bunkerseguridad.com/en/?post_type=product&p=2832 The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output. 10m / 7cm Flame, Battery or DC Operation

The post Flame Sensor FS-1000E appeared first on Bunker Seguridad Electrónica S.L..

]]> The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.

Features:

  • Battery (2x AA type-3 alkaline) or DC Operation
  • External Output to a Security System
  • Variable Response Timer
  • Built-in Alarm Sounder
  • Compact Design
  • Low Battery Warning
  • Battery Check Function

The post Flame Sensor FS-1000E appeared first on Bunker Seguridad Electrónica S.L..

]]> Horn Speaker Sensor AV-100E https://bunkerseguridad.com/en/security-product/horn-speaker-av-100e/ Thu, 15 Oct 2020 10:35:07 +0000 https://bunkerseguridad.com/en/?post_type=product&p=2809 The AV-100E is a horn-type speaker Sensor with built-in microphone. A N/O input is required to trigger the playback of your recorded message. 100dB Horn Speaker.

The post Horn Speaker Sensor AV-100E appeared first on Bunker Seguridad Electrónica S.L..

]]> The AV-100E is a horn-type speaker sensor with built-in microphone. A N/O input is required to trigger the playback of your recorded message.

Features:

  • Genuine Speech Synthesis Device (Requires external trigger)
  • N/O input contact for Activation
  • Easily record your own message (up to 8 seconds) using built-in Microphone
  • Memory Back up for 20 days without power
  • Horn Speaker Type 100dB/1m (max)
  • Suitable for Indoor/Outdoor Use

The post Horn Speaker Sensor AV-100E appeared first on Bunker Seguridad Electrónica S.L..

]]> Horn Speaker Sensor PV-12E https://bunkerseguridad.com/en/security-product/sensor-speaker-pv-12e/ Thu, 15 Oct 2020 10:08:58 +0000 https://bunkerseguridad.com/en/?post_type=product&p=2798 The PV-12E sensor speaker is designed to play a recorded message when the 12m x 75 degree PIR sensor detects the movement of people or vehicles.

The post Horn Speaker Sensor PV-12E appeared first on Bunker Seguridad Electrónica S.L..

]]> The PV-12E sensor speaker is designed to play a recorded message when the 12m PIR sensor detects the movement of people or vehicles. Common applications include welcoming messages at building entrances, or alarm or warning messages at construction sites and other dangerous areas.

Features:

  • Genuine Speech Synthesis Device with PIR Sensor
  • Easily record your own message (up to 8 seconds) using built-in Microphone
  • Memory Back up for 20 days without power
  • Horn Speaker Type 100dB/1m (max)
  • Suitable for Indoor/Outdoor Use

The post Horn Speaker Sensor PV-12E appeared first on Bunker Seguridad Electrónica S.L..

]]>